Learn Navisworks Manage (Navigation Reviewing the Model – Clash detective – 4D – 5D – BOQ-Rendering-Animation)
What Is Autodesk Navisworks Manage?
What you’ll learn
- You will learn how to use Navisworks to review the BIM Model.
- You will learn how to use Navisworks to Present the Model to Consultant or Client..
- You will learn how to use Navisworks to Make Clash Detective between All Systems..
- You will learn how to use Navisworks to Make 4D Simulation..
- You will learn how to use Navisworks to Make 5D Simulation..
- You will learn how to use Navisworks to Make Quantification (BOQ)..
- You will learn how to use Navisworks to Make Rendering Shots..
- You will learn how to use Navisworks to Make Walkthrough in the building..
Course Content
- Introduction –> 2 lectures • 4min.
- Clash Detection –> 19 lectures • 2hr 28min.
- Navisworks 4D & 5D Introduction –> 11 lectures • 1hr 32min.
- Navisworks Quantifications –> 3 lectures • 23min.
- Appearance Profiler –> 1 lecture • 6min.
- Autodesk Rendering –> 2 lectures • 24min.
- Walkthrough & Animation –> 3 lectures • 16min.
- Other Options –> 2 lectures • 6min.
Requirements
What Is Autodesk Navisworks Manage?
Autodesk Navisworks Manage is a comprehensive project review solution that brings together design and construction data into a single model. It’s primarily used by BIM coordinators, project managers, and construction professionals.
Key Features
1. Clash Detection
- Detects hard clashes (physical overlaps) and soft clashes (clearance issues).
- Helps identify conflicts between models from different disciplines (e.g., structural vs. MEP).
- Streamlines coordination before construction begins, reducing costly on-site changes.
2. 4D Simulation (Time + 3D Models)
- Use the Timeliner tool to link the construction schedule (from MS Project or Primavera) with the 3D model.
- Simulate construction sequencing to plan logistics and detect scheduling issues.
3. Quantification
- Takeoffs directly from the 3D model.
- Extract materials, measurements, and quantities for estimation and procurement.
4. Review and Markup
- Use measurement tools, redlining, comments, and viewpoints to communicate design intent or issues.
Autodesk Navisworks Manage 2023 Course Contents:
1- Autodesk Navisworks Manage 2023 Introduction
2- Autodesk Navisworks Manage 2023 Navigation
3- Autodesk Navisworks Manage 2023 Reviewing the Models
4- Autodesk Navisworks Manage 2023 Clash Detective
5- Autodesk Navisworks Manage 2023 Timeliner (4D & 5D)
6- Autodesk Navisworks Manage 2023 BOQ Extraction
7- Material Rendering
8- Animation
Course Description:
- You will learn how to use Navisworks to review the BIM Model.
- You will learn how to use Navisworks to Present the Model to Consultant or Client.
- You will learn how to use Navisworks to Make Clash Detective between All Systems.
- You will learn how to use Navisworks to Make 4D Simulation.
- You will learn how to use Navisworks to Make 5D Simulation.
- You will learn how to use Navisworks to Make Quantification (BOQ).
- You will learn how to use Navisworks to Make Rendering Shots.
- You will learn how to use Navisworks to Make Walkthrough in the building.
- You will learn how to use Revit to review the BIM Model
- You will learn how to use Revit to Navigate the 3D Model.
- You will learn how to use Revit to make sections and 3D views.
- You will learn how to use Revit to extract quantities.
- You will learn how to use Revit to run clash detection.
General Notes:
- This course designed in Navisworks 2023 but applicable with any Revit version.
- If you have any requirements or questions, you will have full support by answering all questions.
- This course applicable for any engineering department (Arch – ST – Mechanical – Electrical)
- This course applicable for any kind of construction project.
- This course is important also for site managers to allow them to review the 3D model and extract any data to help them during installation.