Learn how to set up and control SPI devices using PIC microcontrollers—master data exchange and multi-device interfaces
Tired of confusing communication errors in your embedded systems?
What you’ll learn
- What is SPI and how it works.
- Advantages of SPI.
- Disadvantages of SPI.
- SPI Operation.
- Main SPI Bus Library Functions.
- Interface different devices with PIC Microcontroller using SPI.
- How to implement SPI in your project.
- What is the difference between SPI and other communication methods.
- Why using SPI will make your life easier.
- How to code SPI the right way and how to talk to multiple devices easily.
- A practical example of SPI.
Course Content
- Introduction & Getting Started –> 6 lectures • 9min.
- What is SPI –> 5 lectures • 12min.
- SPI Library –> 4 lectures • 17min.
- Download and Install The Required Software –> 4 lectures • 1min.
- PIC to PIC SPI Communication –> 5 lectures • 18min.
- SPI MikroC Library –> 1 lecture • 3min.
- SPI PIC Example Code between SPI module and 12-bit D/A converter –> 2 lectures • 1min.
- SPI SD Card Example –> 2 lectures • 1min.
- Download and Install Software Section –> 5 lectures • 24min.
- Course Project –> 2 lectures • 4min.
- Practice Test –> 0.
- Course Wrap-Up –> 1 lecture • 34min.
Requirements
Tired of confusing communication errors in your embedded systems?
Whether you’re dealing with displays, memory modules, or sensors, SPI (Serial Peripheral Interface) is one of the most essential protocols in modern electronics. In this course, you’ll learn how to configure and implement SPI communication from scratch using PIC microcontrollers, so your devices talk smoothly and your projects work seamlessly.
Why SPI? Why PIC?
SPI is fast, full-duplex, and ideal for high-speed peripheral communication—but only if you understand how to structure your master-slave interactions correctly. This course walks you through real-world examples that help you:
- Wire and configure SPI-compatible devices
- Write clear C code to handle data exchange
- Handle timing, synchronization, and multi-device setup
- Troubleshoot signal issues and master-slave logic errors
What You’ll Learn
- The theory and electrical basics behind SPI
- Differences between SPI, I2C, and UART
- Master/slave configurations using PIC microcontrollers
- Writing embedded C code to initialize and manage SPI
- Reading/writing data to SPI-enabled peripherals (e.g., EEPROM, sensors, displays)
- Handling multi-device buses with chip select management
- Timing and clock polarity (CPOL/CPHA) explained with clarity
- Debugging communication issues using tools like logic analyzers
Real Projects You’ll Build
- SPI-controlled LED array with PIC
- Data logging using SPI EEPROM
- Display control via SPI OLED
- Multi-slave communication with priority control
- Real-time sensor interface using SPI
Who This Course is For
- Intermediate embedded systems developers
- Electronics students working on real-world communication projects
- Hobbyists using PIC microcontrollers with SPI devices
- Engineers building multi-component embedded systems
- Anyone seeking to master SPI from both hardware and firmware angles
Want seamless communication between your PIC and peripherals?
Enroll now and gain the SPI skills to connect and control any device with precision and reliability.
What You Need
- PIC development board (PIC16F or PIC18F series)
- SPI-compatible modules (EEPROM, OLED, sensor, etc.)
- MPLAB X IDE and XC8 compiler
- Breadboard, jumper wires, logic analyzer (optional for debugging)
Student Feedback
“The SPI timing diagrams finally made sense after this course. Great explanations and code.” — Harpreet S.
“I connected my PIC to an OLED and EEPROM successfully thanks to these hands-on lessons.” — Jorge R.
Instructor Bio
The Educational Engineering Team, led by Ashraf—a seasoned mechatronics engineer and microcontroller educator—specializes in embedded communication. With over 13 years of experience and more than 250,000 students taught, they focus on delivering clear, practical instruction. Their expertise in SPI and real-world interfacing makes this course ideal for anyone serious about building reliable, multi-device systems using PIC microcontrollers.
Enroll Now – Start Building SPI-Based Systems with PIC