FreeCourseWeb.com

Learn the Fundamentals of Corrosion Electrochemistry

Learn the theory and practice to get started acquiring and interpreting electrochemical measurement for corrosion.

This online course on corrosion electrochemistry focuses the electrochemical aspects of aqueous corrosion in five sections. As you progress through this course, you will develop a strong foundation in the understanding corrosion-related processes from an electrochemical perspective.

What you’ll learn

Course Content

Requirements

This online course on corrosion electrochemistry focuses the electrochemical aspects of aqueous corrosion in five sections. As you progress through this course, you will develop a strong foundation in the understanding corrosion-related processes from an electrochemical perspective.

In the first section, “Electrochemical Nature of Aqueous Corrosion,” you will learn about the fundamental principles and classifications of corrosion. You will learn to comprehend the electrochemical nature of aqueous corrosion, including anodic and cathodic reactions, the movement of electrical charge in metals and electrolytes, and the application of Faraday’s law to corrosion-related calculations.

In the second section, “Corrosion Thermodynamics,” you will about the thermodynamic aspects of corrosion. This section discusses the significance of potential measurements in corrosion, standard potentials, and the Nernst equation . You will become able to interpret Pourbaix diagrams to assess the thermodynamic feasibility of reactions based on pH and potential, gaining an understanding of how thermodynamics govern corrosion behavior for different metals/environment combinations.

In the third section, “Kinetics of Corrosion Reactions,” you will focus on the kinetics of corrosion processes. Key concepts, such as activation-controlled reactions and diffusion-limited reactions, will be discussed. You will learn about the factors influencing cathodic reactions, including oxygen reduction and hydrogen evolution, and about the formation of protective oxide films.

In section four, “Corrosion Behaviors”,  you will learn to employ Evan’s diagrams for analyzing corroding electrodes with multiple reactions and estimate corrosion currents using the Stern-Geary equation.  You will gain the ability to interpret potentiodynamic polarization curves to assess corrosion mechanisms and analyze the behavior of passive metals in corrosive environments.

Finally, in the fifth section, “Electrochemical Measurements,” you will learn about the practical aspects involved in conducting electrochemical measurements. This includes setting up a three-electrode cell, converting potential measurements to the hydrogen reference electrode standard, and distinguishing between potential limits referenced to the open circuit potential and the reference electrode. You will also learn to understand and manipulate key parameters for potentiodynamic polarization and linear polarization experiments, along with recognizing the impact of electrolyte resistance on potentiodynamic polarization curves.

By the end of this course, you will have a comprehensive understanding of corrosion electrochemistry from both theoretical and practical perspectives. You should be able to analyze, evaluate, and experimentally measure corrosion processes by linear polarisation and potentiodyynamic polarisation methods.

Please note that, due to the nature of the subjects,  there is some unavoidable overlap in the topics discussed in this course and the course ‘Introduction to Corrosion Science and Engineering’. If you are looking for a course that focuses on corrosion electrochemistry only, this is the course for you. If you are looking for a general course about corrosion ( corrosion mechanisms, corrosion protection measures, and minimal electrochemistry theory)  the most appropriate course for you is ‘Introduction to Corrosion Science and Engineering’ available on this platform.