Start your CFD journey with FLOW-3D — from basics to hands-on modeling.
Are you new to CFD (Computational Fluid Dynamics) and want to start with one of the most powerful simulation tools in the industry? This course is designed to help engineers, researchers, and students quickly master the fundamentals of FLOW-3D — from installation to complete simulation analysis.
What you’ll learn
- Understand basic workflow of Flow 3D for CFD Modeling.
- Setting up the model in Flow 3D.
- Analyzing the results of CFD modeling.
- Troubleshooting CFD models.
Course Content
- Introduction –> 4 lectures • 11min.
- Model Setup in Flow 3D –> 8 lectures • 32min.
- Simulation and Analysis of Results –> 7 lectures • 22min.
- Additional Content –> 2 lectures • 12min.
Requirements
Are you new to CFD (Computational Fluid Dynamics) and want to start with one of the most powerful simulation tools in the industry? This course is designed to help engineers, researchers, and students quickly master the fundamentals of FLOW-3D — from installation to complete simulation analysis.
Through a series of step-by-step lectures, you’ll learn how to build, run, and analyze CFD models confidently. Each section walks you through real-world workflows used by hydraulic and civil engineers in professional projects.
What You’ll Learn:
- Understand what FLOW-3D is and where it’s used in engineering applications
- Learn how to install and navigate the FLOW-3D interface
- Set up models with geometry, mesh, boundary conditions, and physics settings
- Run simulations and analyze results in 1D, 2D, and 3D
- Use probes, flux planes, and result visualizations for interpretation
- Troubleshoot common errors and improve model stability and accuracy
- Get a brief introduction to FlowSight for post-processing and visualization
Who This Course Is For:
- Civil, Mechanical, and Environmental Engineers
- Hydraulic Modelers and Researchers
- Students and professionals looking to learn CFD modeling from scratch
- Anyone curious about simulating real-world fluid flow behavior
Software Used:
- FLOW-3D v11.2
By the end of this course:
- You’ll be able to set up, run, and analyze CFD models in FLOW-3D with confidence — ready to apply your skills to hydraulic structures, flow channels, spillways, and real-world engineering problems.